Click Image for more pictures and specifications. Buy 10 per SKU and save 10%. See the bottom of this description for fitment information.
The best solution for the smallest fixtures. Very bright 5630 LEDs. Fits with reflector in place on most fixtures. Standard Pin Thickness 0.37"/1mm fits most fixtures, slightly larger for tight fit.
Warm White (replicated incandescent light) part number G4-6-5630-WW
Natural White (outside light, slightly warm) part number G4-6-5630-NW (this item)
Cool White (bright white, brightest visually) part number G4-6-5630-CW
- Massive heat reduction
- 6 5630 SMD LEDs. 5630 are brighter than 5050 LEDs
- Dimmable with slide or rotary dimmers.
- Similar Light as the 10w halogens without the heat.
|Amps at 12.0v DC (Fluke Actual)||0.07|
|Rated Volts||10-15v DC|
|Overall Length including pins||1 1/4" / 30mm|
|Overall Width (or diameter)||7/8" /22mm|
3/16" / 5mm
When replacing most standard halogens, Thin Pin (-TP) drops into the socket easier. Some original halogens do have thicker pins though and the standard (thicker) pin will fit better, and the standard pin typically is better when replacing other existing LEDs.
Fit: This LED fits best in fixture with less than 1 1/2" at the measurement below:
53 Reviews Hide Reviews Show Reviews
These natural white lites are more white and appear to be brighter. They do not have the the .yellow tint that your early version of this lite does. I am slowly replacing the older lites as this new whiter lite is much better for the living area
M4 Note: We show your earlier orders were for Warm White, not Natural. This is definitely a whiter mid line color. See our Color Range Page at: http://www.m4products.com/bulb-cross-reference-and-color-range/
great replacement bulb for non task areas, installed them over our dinette, much better lighting than orginal halogen bulbs and much less power consumption.
Bought 28 two years ago. Had my first one start to flicker. Overall pleased with lights. Very bright less watts used. Happy
I bought these as replacements for recessed halogen bulbs over the large slide-out in our travel trailer. So these are over the dinette and couch. The halogens were hot, drew way too much amperage, and the light was too "warm" for my liking. These LED replacements put out a much nicer white light and draw way less power. I will wait to see how long they last, but my initial impression is great. These are very well made also. I like the way the aluminum shell is used as a heat sink. Much cooler than the halogens; you could fry and egg with one of those!
I purchased these to replace the halogen bulbs in my Mountain Aire. They produce much more light than the bulbs they replaced and produce hardly any heat. My wife and I are very pleased with our purchase!
These where easy to install and nice and bright. The only issue I have is when I was plugging them in I felt like the pins could break very easily. Just with the small amount of pressure to plug them in. One in they where set nicely in the light fixture.
M4 Note: Please note we make this in a Thin Pin (TP) version as well which may have been easier to insert in your fixture. If replacing halogens on small fixtures, we normally recommend the TP version.
We replaced the halogen bulbs in our RV. These put out good light, no heat and will reduce out energy consumption. Even better than these bulbs is the customer service of M4! So helpful in assisting us in determining the correct bulbs and type to replace all of our bulbs with LED. THANK YOU M4!
After some practice was able to insert into the Halogen fixtures in the Motorhome. After a month all bulbs still working, not like the others tried.
This looks pretty close in light output and color to the halogen bulbs they replaced.