Click Image for more pictures and specifications. Buy 10 per SKU and save 10%.
Replaced 10w Halogens where you need a small rear pin LED.
This item is only available in Natural White
- Massive heat reduction
- 6 5630 SMD LEDs. 5630 are brighter than 5050 LEDs
- Dimmable with slide or rotary dimmers.
- Similar Light as the 10w halogens without the heat.
|Amps at 12.0v DC (Fluke Actual)||0.07|
|Rated Volts||10-15v DC|
|Overall Length including pins||7/8" /22mm|
|Overall Width (or diameter)||7/8" /22mm|
3/16" / 5mm thick
7/8"/ 22mm with pins
9 Reviews Hide Reviews Show Reviews
This LED fit in a difficult spot that a normal rear pin G4 LED did not reach. The fixtures are the articulating reading light over the bed in my 2008 Roadtrek 210 Popular. Saved me from having to change out the fixtures. I only wish that they came in warm white as an option. Thanks M4 for the great customer service as usual.
The longer pins made it so much easier to change the bulbs in my Roadtrek 190!
So much more light!
Item fit perfectly in my lights on my 190 Roadtrek. The long pins really helped with inserting in the socket.
Extremely happy with the item and the amount of light!
the long pins are the game changer on puck lights on my Roadtrek 190 popular RV. Definitely would recommend them as the replacement for this class B.
Part does not meet M4's mechanical spec. Could not use as the pins were too short and body of LED bottomed out on reflector.
I need 17 of these devices that are dimmable, like the side pin version and have a 1 inch pin, longer is better and it can be trimmed. Hopefully, Steve is working on this problem.
M4 Note: The one star hurts, the lights work as designed, they were just short for the customers fixture which is less common. Our pin did measure slightly shorter than the latest spec, but most likely would not have solved the issue on this particular less common fixture. RA was issued.
All products from M4 are excellent, too bad I wasn't able to install the back pins.
I cannot see the pin holes to insert the lights the housing is too small to see the placement of the pins.
I will call M4 and see if there is another light that would work and if they would let me return the 10 I purchased.
The ordering process was easy and M4 exchanged lights with no problems. It would have been helpful to have more detailed descriptions of the lights to determine whether they would work in my RV light sockets.
We changed out all of the bulbs in our trailer with the Elite series LED lights. Took our trailer out 2 days after receiving all of the lights. The lights worked great, lots of light and ran the lights for 4 days without having to hook up the generator. Never used the generator. Usually we have to run the generator on the second night to charge the batteries. There was very little heat if any from the lights being on, unlike the old bulbs.
Steve at M4 is great, he is patient, knowledgeable and friendly gets right back to you with answers to your questions.M4 took very good care of us. Prices were great, order arrived earlier than promised.
Lights are very good quality. Have looked at other lights that friends have bought. No comparison they got what they paid for which was very cheap low quality lights.
We are going to redo our parents trailer for Christmas this year using the lights from M4 Products. Thank you Steve glad we were told about you and M4. We bought 22 lights: 18, 921-10-5630CW. 2, 1142-17-5630CW and 2, G4-6-5630 Back NW.
We replaced several of the overhead 10w halogens in our Newmar Motorhome. Went with Natural White in bath areas and over kitchen counter prep. Will do warm white in other living areas. Easy replacement and fit perfectly in small reflector.
Our setup includes a "Hi/Lo" dimmer switch for each bank and these replacements do NOT dim on low setting. I believe Newmar uses a 6/12 volt switch to accomplish the dim effect and I expect the LEDs work on both voltages on "hi".
I will likely not change all in the living area.
M4 Note: The G4-6 is dimmable with rotary dimmers. At less than around 10v, as the power decreases below that, they fade off, but by 6v they will be off.