Click Image for more pictures and specifications. Buy 10 per SKU and save 10%.
The brightest bulb this size. For its smaller physical size (smaller size than original 912/921), this Super Bright 5630 SMD LED bulb packs a punch. It has a full aluminum body, is slightly smaller than a 921 incandescent, yes produces a little more light. If you want a an even brighter light, look at our larger 921-17-5630 Elite Series Wedge LEDs. This is part of our Elite Series of bulbs. The PCB base also makes great contact on the first installation. Be sure to browse all of the pictures on this special retrofit light!
This is Warm White which replicates incandesncent light.
For Natural White see part number 921-10-5630-NW
For Brighter Cool White see part number 921-10-5630-CW
|Visible Light||similar to original 912/921|
|Amps at 12.0v DC (Fluke Actual)||0.13|
|Rated Volts||10-30v DC|
|Overall Length||1 1/4"|
|Overall Width (or diameter)||1/2"|
81 Reviews Hide Reviews Show Reviews
Ww are perfect replacement for incandescents. Slightly not as bright
These LEDs replaced two, 5 watt incandescent front seat overhead courtesy/ reading lights that were ok for entry/exit but too dim to see to read. These replacement LEDs are a little longer than the original bulbs but fit in the fixture. They give off a great color and quantity of light. The use of a ruler in the photo s with the bulbs is clever and a good asset in deciding which bulbs to buy.
These bulbs look great when the entire bulb is visible, such as in downward-facing fixtures like the ones in our in motorhome's bathroom. We're so happy M4 had this smaller-bulb option and we're thrilled with the appearance and light output.
One of the LED lights in one of the three wall sconces in my 2015 Winnebago broke. I ordered three lights so that the color of all the sconces would match. I chose these lights because they have they are bright, but have the lowest output of the series, as I didn’t want the light from the sconces to be overwhelming. Now, the sconces are slightly brighter and they are not plagued with an odd greenish-white light that the original LED lights produced. The bases of these lights are much better than the original lights. The original lights had two wire leads which were pressed against the flat mounting sockets. These lights have base that reminds me of a printed circuit board and they are much sturdier than the original lights. The lights shipped quickly and are jjust what I needed.
This will help make my battery last longer when I am not plugged in to shore power. It was so easy to do, just remove the old and put in new.
great as usual
Led's generally have too harsh a light for this elder soul, have long preferred incandescent, so was pleasantly surprised to find this Warm White warmer/less harsh than the incandescents it replaced in my 1995 rv.
I purchased 20 of these lamps and installed them in the camper. In the past just one incandescent fixture would get the fan to turn on in the converter. Now with all the lights on in the trailer the fan doesn't turn on. It only turns on when the outside light turns on and that is still an incandescent light. I did notice that a couple of the lamps were not the warm white that most of them are but one or two are a little more blue than what I was expecting. No need to change as the lights are working and the adjacent bulb in the fixture helps tame the color down.