Loading... Please wait...

Add to Wish List

Click the button below to add the G6.35-18-5630-SIDE-NW Natural White Elite Series WIDE THICK PIN G6.35 to your wish list.

G6.35-18-5630-SIDE-NW Natural White Elite Series WIDE THICK PIN G6.35

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
Your Price:
$12.99 (You save $3.50)
Current Stock:

Product Description

Click Image for more pictures and specifications.  Buy 10 per SKU and save 10%.

Warning:  THIS IS DESIGNED FOR 12 Volt DC Systems.  Do not confuse with items with similar pins that are 120 Volt AC.  Installation into a 120v fixture will cause immediate failure and is not covered under warranty.

THIS IS THE WIDER THICKER G6.35 PIN, PLEASE CHOOSE CAREFULLY.  Most RVs use the standard G4 pins which are 4mm between the pins, these are wider at 6.35mm and are also found in some RV applications.

Very bright Samsung 5630 LEDs.  This equals or betters the output of a 20w halogen without the heat or power draw.  Review the pictures for exact measurements.

Available in:

Warm White (replicates incandescent light) part number G6.35-18-5630-WW

Natural White (outside light, slightly warm) part number G6.35-18-5630-NW (this item)

Cool White (bright white, brightest visually) part number G6.35-18-5630-CW

  • Massive heat reduction and Power Reduction
  • 18 Samsung 5630 SMD LEDs.  5630 are brighter than 5050 LEDs
  • Dimmable with some dimmers, but not universally dimmable with all
  • More Light as the 20w halogens without the heat. 


Item Number G6.35-18-5630-NW
Color Kelvin 4500
Calculated Lumens 600
Amps at 12.0v DC (Fluke Actual) 0.23
Rated Volts 10-30v DC
Polarity Non Polarity
Overall Length including pins 1 15/16"
Overall Width (or diameter) 1 1/2"
Overall Height


Write your own product review

Product Reviews

  1. like the light 5 Star Review

    Posted by on 20th Aug 2016

    Changed most of my lamps to LED in my motorhome. I like the white light over the others I had. Be very careful to follow the instructions, I did not and broke two lamps. Use a finishing nail to slightly enlarge the fixture clips before trying to install the two pin units. After this my units installed easier. I ordered the remaining lamps and the two replacement lamps I had broken for my RV and could not be happier.