Loading... Please wait...

1383-3W-WW Warm White 1383 Retrofit Bulb 3 Watts Aluminum Finned Housing

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
RRP:
$18.99
Your Price:
$14.99 (You save $4.00)
SKU:
1383-3W-WW
Current Stock:
118


Product Description

Click Image for more pictures and specifications.  Buy 10 per SKU and save 10%.

This is a direct 1383 LED Retrofit for most fixtures.  This is a full 3 Watt Bulb with all the light, but pulls only 0.21 amps at 13vdc.  On average uses about 15% of the power of a regular 1383.  Many other suppliers will only offer 1-2w bulbs at this price range which are not bright enough.  Check your fixture at the base to ensure there is clearance fo the larger lower body.

Specifications

Item Number 1383-3W-WW
Color Kelvin 3200
Est. Lumens 400
Amps at 12.8v DC (Fluke Actual) 0.21
Rated Volts 10-30v DC
Polarity Non Polarity
Overall Length 2 1/4"
Overall Width (or diameter) 1 1/2"
Overall Height n/a

Write your own product review

Product Reviews

Previous | Showing reviews 11-20 of 27 | Next

  1. Warm white is perfect 5 Star Review

    Posted by on 2nd Mar 2016

    Tried warm white and natural white and like the warm white much better. Lights work perfectly. No longer burn my finger tips turning the lights off!


  2. Reading light upgrade 5 Star Review

    Posted by on 8th Sep 2015

    I upgraded my two reading lights in my camper. The results are fantastic. less amp draw and much less heat generation than from the incandescent bulbs.


  3. Best alternative for super hot incandescent bulbs I have seen 5 Star Review

    Posted by on 14th Aug 2015

    Our RV has several directional reading lights that had incandescent bulbs with a metal shade. The vinyl ceiling has a clear burn where someone who will remain nameless fell asleep only to awake to the smoke detector siren and the smell of burning plastic. The concentrated heat rising from the light was too much for the vinyl ceiling liner. No more, we now have more light and no heat making the reading lamps functional and fun.


  4. Great substitute for incandescent 5 Star Review

    Posted by on 19th Jun 2015

    As title says great replacements, as close as possible to the incandescent as far as color (Kelvins) and size. M4 was awesome to work with fast and friendly.


  5. Works Great 5 Star Review

    Posted by on 11th Jun 2015

    Works great and plugs right in. Plus it's not burning hot like the lights it replaced.


  6. Nice looking replacement 5 Star Review

    Posted by on 8th Jun 2015

    This is a very well built bulb.

    The beam is a bit more of a spot then a flood.

    It has the same base as an 1141 bulb.

    I used these in a 71' Airstream Land Yacht in the reading spot lights over the sofa/bed.

    I initially installed one of these in the spot light over the kitchen sink but the beam was a bit narrow for that location. I then tried one of the 1156-30-3528-CW economy bulbs in this location and it gives off a wider and visibly brighter light(the can for the bulb on the '71 Airstream is recessed, global shaped and has a gold brushed metallic aluminum finish. This can is a very good reflector so it works better with the omnidirectional economy bulb).

    Keep in mind that if the bulb face is going to be visible in an overhead location then the 1383 with the diffuser face would probably be more aesthetically pleasing. In locations where the spot is below eye level and you can't see the face of the bulb then the 1156-30-3528 or the 1156-24-5050 will provide a bright light with more flood characteristic.

    Bottom line is the M4 bulbs are top notch.

    After replacing EVERY bulb in this '71 including the overhead circular fluorescent bulbs the entire interior is brighter and the combined current for ALL the lights being on is 2.77amps. WOW!

    For the sake of comparison, the three bulb reading light over each of the twin beds used 4.5 amps EACH with incandescent bulbs and the light was yellowish. I installed three LED's initially but they were a tad two bright so removed the center LED and now the light is just right and it is a nice cool white which is great for my tired eyes. Best part is the two LED's that replace the three incandescent bulbs in the reading fixture only use .34 amps! That is a 92% reduction in power!!!!

    NOTE:
    About the fluorescent conversion: I removed the circular bulbs, cut the power wires going to the ballast and then installed 3 of the plate LED's (ALPLATE-24-5630-CW) using the adhesive backing on each one then wired them in with wire nuts to the feed wires I cut from the ballast. Light is just as bright and now consumes .33 amps versus 1.72 amps @ 12.8 volts DC)


  7. Nice Light 5 Star Review

    Posted by on 17th Mar 2015

    Nice bedroom reading light, nice color and tone. Maybe slightly overpriced. good fit, could be best on the market.


  8. Best color light EVER! 5 Star Review

    Posted by on 15th Jan 2015

    I replaced one cheap very poor LED and one incandescent in our bed reading lights. Now we read with proper light, no heated lamp shade and HUGE energy saving in the battery bank. In a short word---Buy these bulbs. They are the best value.


  9. 1383-3W-WW Reading Light 5 Star Review

    Posted by on 5th Jan 2015

    The 1383-3W-WW makes for a great warm white reading light and uses 1/5th the power of the old bulbs and doesn't put off any heat.

    Great fast shipping!


  10. Very Happy Camper 5 Star Review

    Posted by on 27th Nov 2014

    Replacement bulbs for reading lights are the same warm light, but should be cool to the touch and last a lot longer. Great!!



























Previous | Showing reviews 11-20 of 27 | Next