A very bright White replacement tail light or corner for trailers or vehicles. Replaces 1157 or 2057. When possible, use Red under Red, or Amber under Amber, but you can also use Bright White, especially when your lamp also illuminates your license plate. Bright 5630 LEDs are twice as bright as 5050 size LEDs Aluminum cage works as a heat sink to draw heat away from the LEDs, and makes a more robust lamp.
This is a non-canbus light. Canbus is required on some vehicles if the vehicle computer checks for burned out bulbs, or for turn signals (may cause signal to blink rapidly). Trailer lights do not require Canbus LEDs.
If you don't know if you have a heavy duty relay, remove one bulb and turn on your turn signal. If the indicator and remaining bulbs blink at the normal rate, you can use this bulb as is, but if it blinks rapidly this is not compatible. A Load Resistor can also be put in the circuit to cure rapid blink problems.
Total Length - 2 1/8"
Length of Head - 1 7/8"
Diameter - 3/4"
Voltage - 12v DC
Amp Draw 0.40A
Color - Bright White
Not DOT Certified.
2 Reviews Hide Reviews Show Reviews
My new 2018 5th Wheel camper came with LED lighting for the inside but the outside used the standard incandescent automotive bulbs. I thought I would give these a try for the tail lights. The 1157 LED replacement bulbs were as bright as the OEM lights and work great . Next I will replace the marker lights with LED bulbs.
I was having a hard time finding Tail and Brake light bulbs for my 70 Charger Project. Steve helped me pick the perfect combination of bulbs to work in my tail light housings. The 69-70 Charger have 6 taillights, 2 are 1156 bulbs and 4 are 1157, so making sure the light output across all 6 bulbs is critical. They are in and they look Great!